How to use the carton tape sealing machine?

How to use the carton tape sealing machine?
Many products need to be packed in cartons. The cartons are formed manually, which is a relatively tedious task. It is a relatively tedious task to fold the cartons. After the products are loaded, they need to be sealed with tape, so that manual sealing is inefficient. , It is also a waste of consumables. The carton sealing machine solves this big problem for people. For users who use the carton sealing machine for the first time, they don’t know much about the carton sealing machine. Here is how to use the carton sealing machine. ;
1. First, we need to adjust the height of the workbench: loosen the tripod locking screw on the inner side of the tripod, pull out the tripod adjusting frame according to the required height, and then tighten the tripod locking screw.
2. Turn the lifting and shaking handle counterclockwise to raise the upper movement base so that the upper movement base is higher than the box to be sealed.
3. Put the box into the conveyor belt, the length of which is about one-third of the length of the box, according to the size of the box, loosen the guide rod and lock the handwheel, adjust the left and right guide rods and close them to both sides of the box. , Then move the box back and forth to make it pass smoothly, and then tighten the handwheel.
4. Adjust the position of the guide wheel in order to make the box cover tightly closed. Loosen the hand wheel, push the guide wheel frame, make the guide wheel close to both sides of the box, and then lock the hand wheel.
5. Turn the upgrade shake handle clockwise, lower the upper movement base until the upper conveyor belt touches the box body, then take out the box, and shake the handle to lower the conveyor belt another 2~3mm. After the adjustment is completed, the operation can be continued.
6. Install the tape trays on the tape seats of the upper and lower cores respectively, so that the adhesive faces the direction of entering the box, and then the adhesive side bypasses the guiding belt idler, the adhesive side bypasses the unidirectional copper wheel, and the front and back to the top line and Between the rubber wheels, keep the rubber facing the direction of the box.
7. Press the power switch to advance the box body. The box body will move forward with the conveying belt and pass through the linkage sealing mechanism to automatically complete the top and bottom sealing and tape cutting actions of the carton.